Kaluga Laser Innovation
and Technology Center - Center
for Collective Use
and Technology Center - Center
for Collective Use
The main aim of Laser Center is the research and development of laser material processing technologies with further implementation based on mutual cooperation on the industrial enterprises of Kaluga region and Central region of Russia
The laser center is equipped by unique modern laser machines
- Universal technological laser machine ARNOLD RAVENSBURG (Germany), with 5 kW СО2-laser and two working heads for welding, cutting and heat treatment in 2D and 3D regimes.
- Laser machine with the robotized system for displacement and control of the laser beam in the treatment zone VOTAN C40 (JENOPTIK, Germany), with 2kW fiber laser for welding, cutting and heat treatment in 2D and 3D regimes.
- Laser machine with the robotized system for displacement and control of the laser beam in the treatment zone VOTAN C26 (JENOPTIK, Germany), with 600W СО2-laser for cutting of nonmetal materials (plastics, polymers, plywood, paronit etc) in 2D and 3D regimes.
- Laser machine with the robotized system for displacement and control of the laser beam in the treatment zone VOTAN C13 (JENOPTIK, Germany), with 140W diode-laser for welding of nonmetal materials in 2D and 3D regimes.
- Laser machine LW-300, with 300 W solid state -laser (pulse regime of radiation) for micro -welding and cladding of metals.
- Mobile laser machine COMBOLASER with 100W solid state -laser (pulse regime of radiation) for micro -welding and cladding of metals.
- Mobile laser marker with 50W fiber laser.
Portable laser equipment setup «Combolaser»
3D confocal microscope µsurf Mobile, Nanofocus, Germany
Portable laser marker LDesigner Fm
3Dprinter ZCorporationZPrinter
Low speed precision cut-off machine
Low speed precision cut-off machine
Stereo microscope Stemi 2000-C
Programmable automatic metallographic press
Programmable automatic metallographic press
Single disc abrasive machine
Coordinate inspection machine CimCore 73SI
Emission spectrometer ARGON-5SF
Laser center services
Development of laser technologies and processing of small batches of products
Laser training
and retraining
courses
and retraining
courses
Holding open days
R&D of laser technologies and 2D and 3D laser processing of small batches of goods
- Laser cutting, piercing and bending the metallic sheet materials.
- 3D laser cutting of stainless pipes up to 600 mm diameter.
- Laser heat-treatment (hardening in the solid phase; quenching in liquid phase; the combined strengthening: laser treatment with the subsequent thermo chemical treatment).
- Stationary and mobile (with the departure to the client) marking and engraving the surfaces of components and units
- Corrosion protection of welds by methods of laser processing.
- Profilometry with the use of a confocal microscope "Nanofocus".
- Laser cutting of nonmetal materials (plywood, plastics, glass, films, rubber, ceramic and composite materials, etc)
- Cutting of high-strength composite materials of the frameworks: glass-fiber-reinforced plastics, the carbon-fiber reinforced plastics, etc.
- Perforation of surfaces.
- Laser welding of metals (structural carbon steels, high-alloy steels, aluminum alloys, titanium alloys, different materials, etc)
- Laser welding of polymeric materials (polystyrene, polyvinyl chloride, polyoxymethylene, organic glass, etc).
- Repair and the restoration by laser cladding of working surfaces for molds, stamps, punches, matrices, etc.